Difference between revisions of "Nexus Weed Growing/Documentation"

From Nexus
Jump to: navigation, search
Line 44: Line 44:
  
 
You now have a wonderful Irrigation System ready to use with your plants.
 
You now have a wonderful Irrigation System ready to use with your plants.
 +
 +
'''Are your sprinklers not turning on? Touch the red valve on the barrel's pipe. This will turn them on.'''
  
 
== '''Setting Up Plant Patches''' ==
 
== '''Setting Up Plant Patches''' ==
Line 55: Line 57:
  
 
Your plants should now be growing. Now just time to wait about 8 hours for them to grow.
 
Your plants should now be growing. Now just time to wait about 8 hours for them to grow.
 +
 +
== '''Probing Your Plants''' ==
 +
If you are unsure if your plants are growing or getting light/water, then you can check with the moisture probe.
 +
 +
To use the moisture probe, simply attach the moisture probe and touch the dirt patch.
 +
 +
Using the moisture probe will tell you three things.
 +
# If the plant has light.
 +
# If the plant has water. (Moisture Level above 0%)
 +
# How much percentage of moisture is in the dirt.
  
 
== '''Harvesting Your Plants''' ==
 
== '''Harvesting Your Plants''' ==

Revision as of 12:18, 20 June 2019

← Nexus Weed Growing

Nexus Weed Growing Documentation

This documentation is to better help you with the product to help you efficiently work with the product and make use of all of it's features properly. Having trouble using a feature? Consult the documentation below.

Need help navigating this manual better? Please use the table of contents to the right of this page.

Before we get started on using the Weed Growing, we would like to thank you on choosing us! If you have any questions please ask in our Second Life Group. If your questions are not answered, please file a ticket here on our Support Site.

Getting Started

Before starting to grow weed, you will need to take a few steps in growing your weed.
It is a very complex system that will take time, it does not grow within an hour. Plants take at least 8 hours to grow.

What's Inside?

Once you have got everything unpacked, you will notice a lot of tools inside and other items.
These are the tools and what they are used for.

  • Nexus Irrigation Water Barrel (This is used to water your plants and place sprinklers.)
  • Nexus Irrigation Pipes (This is used lay the pipes for the Irrigation Barrel.)
  • Nexus LED Light (This is used to give your plants the light they need to grow.)
  • Nexus Cannabis Seed Patch (Where you plant your seeds.)
  • Nexus Cannabis Seeds (Your seeds....)
  • Nexus Cannabis Scissors (Used to harvest the plants once they have grown.)
  • Nexus Cannabis Trowel (Used to dig up dead plants.)
  • Nexus Water Can (Allows you to get water from LL Water and put it into the barrel.)

Setting Up Water Irrigation

Now that you know what everything is used for and what it does, you will need to understand how to set up your water for your plants. This will allow the plants to grow.

  • Rez out Irrigation Water Barrel and position it where you're growing.
  • Wear the Irrigation Pipes, and allow the HUD to attach.
  • Once the HUD is attached, select your Pipe Type and start laying pipes.

The Pipe HUD is a very simple tool that will allow you to place pipes without having to rez anything.
All the work is done for you in a simple matter. All the positioning and rotations.

  • After you have placed your pipes, select Finish Building.
  • When you select Finish Building, it will ask you to link everything. This will reduce the amount of prims used up by the Irrigation System.

Now that you have set up your pipes, it is recommended that you get your Water Can and start filling up your barrel.

You now have a wonderful Irrigation System ready to use with your plants.

Are your sprinklers not turning on? Touch the red valve on the barrel's pipe. This will turn them on.

Setting Up Plant Patches

Browse your inventory and look for your Seed Patch.
The seed patch is where your plant will be growing from. Setting it up is extremely simple.

  • Rez out Seed Patch and position around a water sprinkler.
  • Attach the Cannabis Seeds. Touch the patch.
  • Your little seedling will now be growing from the patch. Partially.
  • To complete the growth process, you need to position an LED Light above the plant.

Your plants should now be growing. Now just time to wait about 8 hours for them to grow.

Probing Your Plants

If you are unsure if your plants are growing or getting light/water, then you can check with the moisture probe.

To use the moisture probe, simply attach the moisture probe and touch the dirt patch.

Using the moisture probe will tell you three things.

  1. If the plant has light.
  2. If the plant has water. (Moisture Level above 0%)
  3. How much percentage of moisture is in the dirt.

Harvesting Your Plants

Have the patience for them to finally grow? Now time for the rewards!

  • Attach your Cannabis Scissors and allow the Harvest HUD to attach.
  • Find a plant and touch it.
  • If you have your Harvest HUD attached, you will notice the number update at the top. This is how much drugs you are carrying.

Once you are done harvesting your drugs, you will be able to get either a baggie or a brick. 1 Brick = 10 Baggies. 1 Baggie = 1 Joint.

If you choose to get a brick when harvesting, you will need to rez it and click it to get the baggies from it.

Removing Plants

If your plant has died or you just harvested it, you are able to use the trowel to remove the plants.

  • Attach Trowel
  • Click the plant to remove. (Cannot be undone)
  • Poof, out goes the plant.

To remove, you click the plant and not the patch of soil.

Distribution

All the drugs are transferable! That means you can sell them, give them away, or maybe consume them yourself.
When consuming the drugs, you will need to attach the baggie and touch it.
After you smoke the drugs inside, it will no longer be able to be used!

Good luck on your major drug growing/dealing/usage!