Revision as of 16:55, 24 February 2017

← Nexus Burglar Alarm System

Nexus Burglar Alarm Documentation

This documentation is to better help you with the product to help you efficiently work with the product and make use of all of its features properly. Having trouble using a feature? Consult the documentation below.

Need help navigating this manual better? Please use the table of contents to the right of this page.

Before we get started on using the Burglar Alarm System, we would like to thank you for choosing us! If you have any questions please ask in our Second Life Group. If your questions are not answered, please file a ticket here on our Support Site.

Control Panel

Your control panel is used for controlling your Alarms, Lights, and Sensors.

Setting it up is extremely easy. All you need to do is follow the steps.

To Setup

Follow these steps to setup your Annunciator.

1. Rez out the control panel.
2. Right Click and go into the object's contents.
3. Edit the notecard "_config".
4. Enter an Alarm ID. (This is used to link alarms together).
5. Choose who you want to access it. (Access)

If you don't want to use the pagers, then your control panel is all set up.

Since the pager API is pre-built into the control panel, you can set all the variables in "_config" notecard.

Setting Up Pagers

1. Get Pager Network ID from Pager Computer Terminal.
2. Put Pager Network Key in "PagerKey" in the _config notecard.
3. Enter the channel you would like burglar alarm messages to be sent on.
4. Set how you want the message to be sent. Setting "ToneOut" to "Pager" will send it to only pagers.
5. Set the location of your control panel.
6. "PagerDebug" will send you pager's API error messages, if you're getting no messages on the pagers, this will help you and tell you why.