Latest revision as of 23:55, 7 November 2015

← Nexus Intercom System

Nexus Gridwide Intercom System Documentation

This documentation is to better help you with the product to help you efficiently work with the product and make use of all of it's features properly. Having trouble using a feature? Consult the documentation below.

Need help navigating this manual better? Please use the table of contents to the right of this page.

Before we get started on using the Intercom System, we would like to thank you on choosing us! If you have any questions please ask in our Second Life Group. If your questions are not answered, please file a ticket here on our Support Site.

Setting Up The Transmitters

Setting up all the items with this is very simple, everything is note-card configured! Just like our fire alarms, everything works off of networks. When you are to start using a network, all you have to do is go into the notecard of the item you want, and enter the "Intercom ID". When this is done, you can have unlimited channels.

You can unlimited Channels under every network. (Called Labels in the Configuration Notecards)

Choosing a Transmitter

Every transmitter is differrent. Since there are currently only 2 at the moment, you have the choice between the Phone or the Microphone. The Phone can only be configured to one channel, as the Microphone can be configured to 8 channels and allow transmission on multiple channels when buttons are clicked.

Setting It Up

To set up the transmitter, follow these steps.

1. Rez Out Your Transmitter (We'll, use the Microphone Version as an example)
2. Right Click the Transmitter, then go into the contents.
3. Open the notecard "_config".
4. Enter a name for your network under "IntercomID"
5. Enter your access level you'd like. This prevents abuse from users.
6. Configure your channels onto buttons using the "ButtonLabel" fields. If you put the channel "Example" on "ButtonLabel1" and press the button "1", then when you talk in chat, any speaker configured to the Channel "Example" will receive the message from any Grid.

Setting Up The Speakers

The speakers can be set up in any region and any grid. Want to send messages to the Beta Grid? Well this will easily do it!

To set up the speakers, follow these steps.

1. Rez out a speaker.
2. Enter your network name under "IntercomID"
3. Enter the speaker's channel under "LabelAssignment".
4. Bam! Everything works. Feel free to position it wherever you like!