Revision as of 11:55, 2 September 2018

← Nexus Meth Manufacturing

Nexus Meth Lab Documentation

This documentation is to better help you with the product to help you efficiently work with the product and make use of all of its features properly. Having trouble using a feature? Consult the documentation below.

Need help navigating this manual better? Please use the table of contents to the right of this page.

Before we get started on using the Meth System, we would like to thank you for choosing us! If you have any questions please ask in our Second Life Group. If your questions are not answered, please file a ticket here on our Support Site.

Getting Started

Before using the Nexus Meth System, please be aware that it is rather complicated to get the hang of.
Please make sure to read all documentation so you are understanding of how to make the Meth!

What's Inside?

Once you have got everything unpacked, you will notice a lot of tools inside and other items.
These are the tools and what they are used for.

• Nexus Meth Tool HUD (This is a transferable tool that is used to make the meth)
• Nexus Foldable Table (Used to put shit on...)
• Nexus Standing Heater (This is your oven to cook the Meth on trays)
• Nexus Meth Filter & Funnel (Filters out the liquids)
• Nexus Pill Processor (Used to grind up certain ingredients)
• Nexus Orbital Shaker (Shakes the conical flasks)
• Nexus Chemical Storage Shelf (Stores all the chemicals)
• Nexus Trash Barrel (Gets rid of all your trash)
• Nexus Meth Trailer House (A wonderful gift from a friend to you for your wonderful cooking needs)

Setting Up Your Meth Lab

Obviously, you will need everything set up before you start cooking your meth.
These items are required for your meth lab.

• Standing Heater
• Filter & Funnel
• Pill Processor
• Orbital Shaker
• Chemical Storage Shelf

Once you have those items placed out, go ahead and move on towards your next steps.

Making Pseudoephedrine

Before you start, don't forget to set up your HUD! Wear the HUD and attach the items for your hands.

Psuedoephedrine is one of the main ingredients in meth. It takes a little preparation. You will need to get it from Pill form, down to powder.

1. Grab Pseudoephedrine Hydrochloride Pills from the Chemical Storage Shelf.
2. Place the Pseudoephedrine Hydrochloride Pills into the Pill Processor.
3. Repeat those steps 10 times until Processor is full, then press the power button.
4. Touch the Processor to pick it up.
5. Select the Conical Flask under tools, then merge together.
6. Grab Methanol from the Chemical Shelf and mix with Pseudoephedrine.
7. Place Conical Flask onto the Orbital Shaker and allow for drugs to mix.
8. Once Orbital Shaker is finished, grab the conical flask and run it through the Filter & Funnel.
9. Once Filtered, retrieve the filter then place all the Pseudoephedrine onto a Metal Tray(Tool).
10. Place Metal Tray into the Standing Heater and allow to dry for about 2 minutes.

That's how you set up your Pseudoephedrine! Now you can make as many trays as you want and allow them to sit. The difficult part is now finished.

Mixing The Rest

So far you have the worst chemical out of the way, not it's time to mix everything together into one batch.
This will make one brick per tray.

1. Grab a Beaker(Tools) and add Iodine(Chemical Shelf) to it.
2. Add Red Phosphorous(Chemical Shelf) to the same Beaker(Tools).
3. Add Hydrochloric Acid(Chemical Shelf) to the same Beaker(Tools). (If you didn't notice, your beaker will switch hands. This will allow for you to pick up the metal tray.)
4. Grab the Metal Tray with Pseudoephedrine from the Standing Heater and Mix into the Beaker. (Pseudoephedrine needs to be Dry)
5. Transfer Beaker Contents into a Conical Flask(Tools)
6. Place Conical Flask onto an Orbital Shaker for 3 minutes.
7. Once Finished, add Sodium Hypochlorite to the same Conical Flask.
8. Place Conical Flask back onto the Orbital Shaker for 3 minutes.
9. Once Shaker is finished, grab the Conical Flask and pour the contents onto a Metal Tray.
10. Place the Metal Tray into the Standing Heart for 2 minutes.
11. Once 2 minutes pass, take the Metal Tray out and go to the Pill Processor.
12. Touch the Pill Processor to add the contents of the tray.
13. Once it is finished grinding, pick up the Pill Processor.
14. Place the contents from the Pill Processor to Plastic Wrap(Tools).
15. Remove the Pill Processor and poof! You have successfully made a brick of meth.

Frequently Asked Questions

A lot of questions that we seem to get quite a bit are listed here.

What is the trash can for?
Whenever you throw a chemical away or use it, the chemical will be thrown onto the ground. The trash can will collect that garbage if it is placed.
Why is nothing working in the standing heater?
The Standing Heater will only cook the product on the trays if the door is closed. Everything cooks in 2 minutes. If it hasn't been sitting in there for that long, it will not cook. Once it is removed and placed back inside, then the tray's timer will be reset. Why won't my lab blow up?
The causes for a Meth Lab explosion are due to stupidity. Most of the time it is from a cook smoking around a propane or improper ventilation of the building. Once that happens, they start smoking and Poof. Fire everywhere...

Distribution

All the drugs are transferable! That means you can sell them, give them away, or maybe consume them yourself.
When consuming the drugs, you will need to attach the baggie and touch it.
After you smoke the drugs inside, it will no longer be able to be used!

Good luck on your major drug creation/manufacturing/growing/dealing/usage!

Disclaimer

This system is not 100% accurate, it is not intended to be used as a guide to producing real world methamphetamine. Doing so can cause harm to self or others. We do not support the use of illegal substance in the real world. If you use this as a guide for real world production, we will not be responsible for any harm you inflict upon yourself. We warned you.