Difference between revisions of "Nexus Radio Scanner/Documentation"

From Nexus
Jump to: navigation, search
(Created page with "← Nexus Radio Scanner {|align=right |__TOC__ |} = '''<span style="color:#4D5A93;">Nexus Radio Scanner Documentation</span>''' = This documentation i...")
 
Line 14: Line 14:
 
If your questions are not answered there they will be logged by our group bot and sent to our group managers.
 
If your questions are not answered there they will be logged by our group bot and sent to our group managers.
  
<span style="color:#C1BE00;">'''!!! WARNING !!!''' To respect the privacy of some network owners, they have the option to block network scanners on their network servers. You will still get the messages, however; it will look like jumbled up text. It is highly recommended to ask a network owner to use a scanner on their network.</span>
+
:<span style="color:#C1BE00;">'''!!! WARNING !!!''' To respect the privacy of some network owners, they have the option to block network scanners on their network servers. You will still get the messages, however; it will look like jumbled up text. It is highly recommended to ask a network owner to use a scanner on their network.</span>
  
 
= '''<span style="color:#4D5A93">Configuring A Scanner</span>''' =
 
= '''<span style="color:#4D5A93">Configuring A Scanner</span>''' =
Line 45: Line 45:
 
# Copy the network key from chat. Then touch the scanner again.
 
# Copy the network key from chat. Then touch the scanner again.
 
# Select ''Enter Key'' from the menu and paste the Network's Key. This will connect your scanner to the network.
 
# Select ''Enter Key'' from the menu and paste the Network's Key. This will connect your scanner to the network.
 +
 +
= '''<span style="color:#4D5A93;">Scanner Operation</span>''' =
 +
Working with the scanner is very simple, you can either leave it sitting there to receive messages, or you can also configure one of the handheld scanners to your base scanner, then proceed to distribute the handheld scanners.
 +
 +
:<span style="color#4D5A93;">'''!!! INFO !!!''' Remember, you won't be able to send messages, you are only able to receive them with this scanner. Also, don't forget to set your set your handheld devices to No-Transfer.</span>
 +
 +
=== Configuring Handheld Devices ===
 +
----
 +
To allow for you to receive messages while you're not standing next to your scanner, you will need to configure a handheld scanner.
 +
 +
Configuring a handheld device is just like configuring a normal radio with the main system.
 +
 +
# Rez out ''Nexus Radio Scanner - Belt Receiver'' next to the scanner from your inventory.
 +
# Touch the receiver to configure it.
 +
# Right Click -> Edit and change the permissions to No-Transfer. This will prevent distribution.
 +
 +
Congratulations, you have just finished configuring the Handheld device!
 +
 +
=== Scanner Menu & Options ===
 +
----
 +
The scanner has few options that make it easy to use.
 +
 +
==== Sound On/Off/ ====
 +
When a scanner receives a message, you have the option of getting sounds played.
 +
 +
To turn them on and off, simply press the button in the menu.
 +
 +
==== Messages ====
 +
There are multiple ways to receive messages, selecting this will give you the option of the way messages are sent out.
 +
* '''Whisper''' This will send messages to any person within 10 meters of the scanner.
 +
* '''Say''' This will send messages to any person within 20 meters of the scanner.
 +
* '''Owner Say''' This will send messages to the owner within 20 meters of the scanner.
 +
 +
==== Power On/Off ====
 +
This will disable the scanner. It will prevent messages from being received on the scanner.
 +
 +
However, messages will still be received by the handheld devices.
 +
 +
= '''<span style="color:#4D5A93;">Frequently Asked Questions</span>''' =
 +
These questions have been asked a lot by people using the system.
 +
 +
=== Why is my belt receiver not getting any messages? ===
 +
The handheld belt receiver only receives messages when the scanner is rezzed in world.
 +
 +
If the scanner that this device is connect too is no longer in world, then you will not get any messages on the device.
 +
 +
=== Why does the text received look unreadable? ===
 +
Every Radio Network has the right to ''Block Scanners'', if the network owner decided to turn this on, then all the text received by the scanners will show up as a pile of letters in random order.
 +
 +
=== Is it possible for my scripts to listen to scanners? ===
 +
Yes, of course! Have a look at the example script below to learn how to listen to the radio networks.

Revision as of 12:54, 17 March 2016

← Nexus Radio Scanner

Nexus Radio Scanner Documentation

This documentation is to better help you with the product to help you efficiently work with the product and make use of all of it's features properly. Having trouble using a feature? Consult the documentation below.

Need help navigating this manual better? Please use the table of contents to the right of this page.

Getting Started

Before we get started on setting up the scanner, i would like to thank you on using our system. If you have any questions please ask our group. If your questions are not answered there they will be logged by our group bot and sent to our group managers.

!!! WARNING !!! To respect the privacy of some network owners, they have the option to block network scanners on their network servers. You will still get the messages, however; it will look like jumbled up text. It is highly recommended to ask a network owner to use a scanner on their network.

Configuring A Scanner

Before you will start receiving messages, you need to understand how to find networks.
There are two ways to find a network, you can either search for the network's name, or search for the network owner's name.

Lets start off using an example.

Searching Network By Network Name


This method may not be the best, as most users don't always name their networks.

If they don't name their network, then it will be named Private Network.(It's not recommended to search 'Private Network' in your scanner....)

  1. Touch your scanner and select Net Name.
  2. Enter Random into your scanner. This will search for networks with the word Random in the name.
  3. Look in your chat log, it will display the network key for this network.
  4. Copy the network key from chat. Then touch the scanner again.
  5. Select Enter Key from the menu and paste the Network's Key. This will connect your scanner to the network.

Searching Network By Network Owner Name


This method is the easiest if you already know who owns the network. All you will have to do is search the Network Owner's name and all the radio networks they own will show up on the scanner.

This method works similar to search for a network name, except you enter the user's name.

  1. Touch your scanner and select Net Owner.
  2. Enter Shymus.Roffo into your scanner. This will search for all the networks that are owned by Shymus Roffo
  3. Look in your chat log, it will display the network key for the networks owned by this person.
  4. Copy the network key from chat. Then touch the scanner again.
  5. Select Enter Key from the menu and paste the Network's Key. This will connect your scanner to the network.

Scanner Operation

Working with the scanner is very simple, you can either leave it sitting there to receive messages, or you can also configure one of the handheld scanners to your base scanner, then proceed to distribute the handheld scanners.

!!! INFO !!! Remember, you won't be able to send messages, you are only able to receive them with this scanner. Also, don't forget to set your set your handheld devices to No-Transfer.

Configuring Handheld Devices


To allow for you to receive messages while you're not standing next to your scanner, you will need to configure a handheld scanner.

Configuring a handheld device is just like configuring a normal radio with the main system.

  1. Rez out Nexus Radio Scanner - Belt Receiver next to the scanner from your inventory.
  2. Touch the receiver to configure it.
  3. Right Click -> Edit and change the permissions to No-Transfer. This will prevent distribution.

Congratulations, you have just finished configuring the Handheld device!

Scanner Menu & Options


The scanner has few options that make it easy to use.

Sound On/Off/

When a scanner receives a message, you have the option of getting sounds played.

To turn them on and off, simply press the button in the menu.

Messages

There are multiple ways to receive messages, selecting this will give you the option of the way messages are sent out.

  • Whisper This will send messages to any person within 10 meters of the scanner.
  • Say This will send messages to any person within 20 meters of the scanner.
  • Owner Say This will send messages to the owner within 20 meters of the scanner.

Power On/Off

This will disable the scanner. It will prevent messages from being received on the scanner.

However, messages will still be received by the handheld devices.

Frequently Asked Questions

These questions have been asked a lot by people using the system.

Why is my belt receiver not getting any messages?

The handheld belt receiver only receives messages when the scanner is rezzed in world.

If the scanner that this device is connect too is no longer in world, then you will not get any messages on the device.

Why does the text received look unreadable?

Every Radio Network has the right to Block Scanners, if the network owner decided to turn this on, then all the text received by the scanners will show up as a pile of letters in random order.

Is it possible for my scripts to listen to scanners?

Yes, of course! Have a look at the example script below to learn how to listen to the radio networks.