View source for RolePay Water Meter Expansion

[[Rolepay Money System/Expansions|← Rolepay Money System Expansion Packs]]
{|align=right
|__TOC__
|}

= '''<span style="color:#4D5A93">Using Expansion Packs</span>''' =
<p>In order to use any expansion pack, you must have an API key only obtained from the Web Interface from the RolePay Server.<br />You can also obtain an API key from the network owner or someone who has access to the Web Interface.</p><br />

= '''<span style="color:#4D5A93">Making Expansion Packs</span>''' =
<p>Want to learn how to make expansion packs? All expansion packs are made using the [[Rolepay Money System/API|RolePay Money System API]].<br />All you will need is basic knowledge of HTTP and LSL.</p><br />

= '''<span style="color:#4D5A93">Setting Up The Water Meter Expansion</span>''' =
<p>These steps assume that you already have an API key.<br />Follow these steps to configure your device.</p>
* Rez out Item "RolePay Water Meter".
* Click the Water Meter and input the API key into the dialog box.
* Specify if you would like funds sent to the network funds or a specific user.
* Your Water Meter is ready for configuration.


= '''<span style="color:#4D5A93">Configuring the Water Meter</span>''' =
<p><span style="color:red">To access the admin menu, <b>click & <u>HOLD</u></b> the meter</span><br/><br/>The admin menu allows you to set the following:</p>
* <b>$/Gallon</b>: Specify the cost per gallon
* <b>Gallons/Hr</b>: Specify how many gallons of water will go through the pipe per hour
* <b>Lockout@$</b>: Lock the water meter if the accumulated cost reaches a certain amount. This will require the owner of the water meter or a fellow admin to turn it back on.
* <b>Turn On / Turn Off</b>: Activates/Deactivates the Water Meter.
* <b>Reset</b>: This will reset the Water Meter completely (Requires API Key to be entered and funding deposit selection).
* <b>Assign User</b>: Assign the Home Owner that will be paying the water meter.


To assign administrators to the Water Meter, open the "_admins" notecard, located in the contents of the Water Meter object.
Assign <b>one user per line</b> in the following format:<br/>
<code>ADMIN = UserKEY</code>


= '''<span style="color:#4D5A93">Water Meter Stats</span>''' =
<p>The assigned Home Owner and administrators can view the water meter stats; the menu will display the following items:</p>
* Cost per Gallon
* Flow Rate
* The Cost Accumulated
* Time Running
* Gallons Used

<p>The Home Owner can pay for the Water Meter consumption at anytime by clicking the meter and selecting "Pay Now", as long as a lockout limit has not been met or exceeded (if set); otherwise, a utility admin/owner will have to come by and unlock it.</p>